Freshwater Pump Controller
Control and manage your freshwater pump
Designed to control the freshwater pump using a high-quality pressure sensor, this device boasts intelligent features, enhancing pump reliability and noise reduction. With an intuitive interface, it requires no specialized tools for calibration. The FWPC offers two PWM-controlled outputs, an audible warning, and arrives ready-to-install with necessary accessories. Energy efficient, it's also "MRS Cloud Connect" compatible. If the sensor malfunctions, the system relies on the pressure switch for operation.
- Easy calibration, no specialized tools or software is required.
- FWPC supports two high current outputs with pressure switch. PWM control. The standard system has single pump output and audible warning device.
- Being a plug-and-play solution, FWPC has all the necessary accessories from the box, cable harness, audible warning device, fuse connection kit including butt connectors, etc.
- Current consumption is very low, in sleep mode is 0.2mA @ 12V, and in stand-by mode is 25mA @12V.
- "MRS Connected Network compatible" via cellular network or Wi-Fi.
- High-quality pressure sensor included. In case of any error or malfunction from the sensor, the system will continue to operate based on the info from the FWPC supports two high current outputs with pressure switch.
- Hassle-free plug-and-play solution equipped with all the necessary accessories to complete the installation.
Features
- Short & open circuit protection
- Configurable water pressure
- Configurable min & max pressure levels
- User-friendly calibration
- PWM control (smooth start & finish)
- 4 - 20 mA fail-safe pressure sensor
- Running on pressure switch (optional)
- Very cost-effective solution
- Customer-specific requests possible
Parts
Controller
Pressure Sensor
Cable Harness
Audible Warning Device
Connection diagram
Specifications
Operating voltage
- 9 - 32V
- Overvoltage protection > 33V
- Reverse polarity protected
Outputs
- 2 x 10A
- 2 high current outputs, max. 15A @ 40°C
- max. 10A @ 85°C
- Current & Voltage monitoring
- Overcurrent protection, 160% by default
Inputs
- 3 x multi-input
Temperature range
- from -40°C to +85°C
Protection
- IP65
Standby mode current
- 25mA @ 12V
Sleep mode current
- 0.2mA @ 12V
Communication
- CAN bus, NMEA compatible
Certification
- CE, ROHS, ECE R10 057515
Kontakt
Sie möchten mehr über unsere Freshwater Pump Controller Lösung erfahren?
Dann kontaktieren Sie uns.