Controllers
Connected Controllers
Our connected controllers are used to expand existing CAN systems but can also be used as stand-alone head unit. Programming is done with the graphical software tool Developers Studio or Applics Studio or with C-Code.
PLC Controllers
PLC controllers are programmable logic controllers. The modules do not have a CAN- or LIN-Bus interface, but therefore have additional pins available for further functions. The same requirement profile can thus be realized with a more compact design.
Gateways
As a central point for all control units, gateways provide high performance in the filtering and routing of data and information. MRS-Gateways are used in the marine sector to control, coordinate and communicate to all control units in the boat.
Smart and parametrizable Relays
Solid State Relay
Maintenance free relays for load currents of up to 25 A. Positive or negative signal and high capacitive and inductive currents.
Pulse Relay
Switch consumers of up to 20 A on for a predefined time. Potential free/VCC output and positive or negative control.
Time Relays
Switch consumers of up to 70 A on or off after a predefined time. Potential free/VCC output and positive or negative control.
Toggle Relays
Switch consumers of up to 20 A on and off with a single push button. Potential free/VCC output and positive or negative control.
Voltage Monitors
Switch consumers of up to 15 A when the voltage exceeds or falls below a predefined threshold voltage.
Frequency Monitors
Switch consumers of up to 15 A on or off when a predefined frequency threshold is exceeded or not reached.
Flashers
For directional and warning flashing light applications. A blink frequency of up to 120 pulses per minute is supported.
DC/DC Converters
Provides two stabilized reference voltages for your applications, which can be used e.g. to supply sensors.
Multifunctional HMI-Displays
MConn 7", 10.1", 12.3"
MConn is a very powerful and flexible HMI, featuring a 32-bit quad-core ARM Cortex A9 processor with 2D, 3D, and vector graphics hardware acceleration. It is available in different screen sizes and offers four digital outputs, 18 multifunctional inputs, two CAN and one LIN interface. It comes with Ethernet, Wi-Fi, GPS as well as BLE connectivity and offers two optional USB 2.0 Type A ports. Microphone, audio-in and four analog video interfaces are optional.
TConn 4.3", 7"
The TConn is a cost-efficient CAN-Bus display with IP67 protection featuring a 4.3 or 7 inch screen with up to 850 nits brightness. The screen is optically bonded for optimal readability even in direct sunlight. An i.MX6 processor with 528 MHz, 2 GB memory, and 256 MB RAM ensures all-time reliable performance.
MConn Mini 2.4"
The MConn Mini is a 2.4 inch, and therefore our smallest CAN-Bus capable display. Due to its compact size and four capacitive touch buttons, it allows to add control functionality with only tight installation space available. With IP6K8 and a M12 connector, it is a perfect companion for a variety of marine applications.
